Stunt Scooters Maintenance Tips

Depending on the frequency of which you may use your Stunt Scooters and package up to if you happen to ride it, will ultimately ascertain what amount maintenance necessary if you are carried out and what components should be replaced and exactly how frequently.

Routine Maintenance.

It's crucial to be positive your Stunt Scooters is kept well maintained and no matter how many times you might use your scooter the following factors should be checked before just about every individual riding session:

1. Wheels - check to ascertain if the wheels are worn to a new low level. Riding your scooter on worn wheels can certainly be unsafe which enables it to affect turning and stopping.

2. Bearings - check the wheel bearings, and forward stem bearings to acquire a excessive play and wear.In order to check on for play from inside the wheels hold the wheel (or fork) firmly and try to move from side to side. In the event that there exists certainly excessive play then go on to check the retaining bolts for tightness. You might want to replace the bearings. Next look for wear by spinning the wheels or moving the forks and pay attention to regularly hear any grating noises, again this may mean it comes to getting replacing.

3. Assess for damage. The perfect to check out each and every following areas:

1. Front forks.
2. Rear forks / wheel retainer.
3. Foot plate - especially browse through the welded joints.
4. Handlebars - check for alignment and again for weld damage.
5. Quick release mechanism - ensure the quick release folding mechanisms operate correctly and check height adjusters for damage.
6. The handlebar adjuster. Make certain it's tight and secure prior to riding with all the handlebars can't be moved.
7. Brakes - If your scooter comes with a brake - look for wear and replace if needed.
8. Handle bar grips - watch out they're fitted securely and rotate.

Annual Maintenance-This can be carried out more often make use of your Stunt Scooters more often.

1. Replace and fit new wheel bearings if need be.
2. Replace and install front handlebar stem bearings.
3. Check the scooter over thoroughly with regard to damage.
4. Fit new handlebar grips and see if the old ones are worn.
5. Check all quick release mechanisms.
6. You want to keep scooter clean, wash if required.
7. Apply lubricant to pertinent areas and start using a dry lubricant as suggested by way of the scooter manufacturer.